Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen which allows for a write-to-write experience, whilst you are away from home. This is due to the unique design of the pen. It has two tanks, one smaller than the other, that house the e juice and charged batteries. When the user wants to write, he just places the pen into the smaller tank and places the ink in the chamber where it’ll be vaporized. He simply turns on the pen and writes as if he could be writing under a black mirror.
One of the biggest attributes of the Smok Pen is its ability to charge while it is on your desk. This is due to the coils on the Smok Pen were created in a way to help keep the e juice from dripping onto the table or anywhere else. This is because of the 0.3-ohm coil that is placed in the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents won’t affect the writing process. It is because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that comes with it. Since the electronic circuitry includes a safety barrier built in, because of this there is no risk involved when charging these devices through the computer. The Smok Pen includes a charging capacity of sixteen 50 mah batteries, that is great for all pens that use one or two batteries.
In order to keep the Smok Pen working for an extended period of time it is important you don’t overcharge the battery. Overcharging the battery will certainly reduce the voltage that’s available and may eventually bring about these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that your battery is not getting the vapor it should, remove the pen from the power source and let it cool off for a couple minutes.
The fire button on the Smok Pen is located in the bottom right corner of these devices. The fire button has an orange light, which indicates that it’s on. You can press this button to activate the electronic heating element which will enable you to vaporize the oil. After you have done so you can take away the coil from the holder and stick it into the holder and place the Smok Pen into the airflow chamber, which will cause the heating element to start heating up and burning away the wick.
Once the coil is removed from the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are put inside the holder plus they get heated from the airflow. After they get hot they start to turn blue, which is the indication that it’s ready for the pen’s battery. Ensure that you place your sub-ohm into the chamber before you push the fire button. If you don’t put the coil into the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must make sure that you have disconnected all the leads. Then you vapinger.com need to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a little cotton bud, to help you eliminate leak. Then reattach the cap back to the Smok Pen and you also will be ready to place the battery into the pen.
The ultimate portion of the construction process may be the adapter plate, which fits in to the Smok Vaporizer’s USB port. This plate permits you to charge your e-juice during your computer, so long as you have an adapter for USB connection. I really like this part as it allows me to charge my entire kit simultaneously without fretting about running out of power or constantly running out of e-juice.